Eagle Lights 2” Bullet Style Rear LED Turn and Stop Signal Kit for Harley Davidson - (Bikes w/o Rear Center Tail Light) - (2) Rear Turn Signals

Save $ 20
filler

Lenses: No Lenses
Load Equalizers for Pre-2014 Motorcycles : Click to Learn More
Price:
$ 69.99 $ 89.99
Stock:
In stock

Description

Installation Instructions

LED Turn Signal Installation Instructions

Do I need an Eagle Equalizer?

Go Back To Top

The Eagle Equalizer eliminates hyper flash when installing LED turn signals on pre-2014 Harleys by slowing the turn signal flash rate to the normal speed. An Eagle Equalizer is NOT needed on the following models:

  • 2011 and Newer Softail Models
  • 2012 and Newer Dyna Models
  • 2014 and Newer Sportster Models
  • 2014 and Newer Touring Models

An Eagle Equalizer is the plug and play solution to correct hyper flash. Hyper flash is when the turn signals will start flashing faster than normal after a few seconds. The Eagle Equalizer plugs directly into the wiring harness underneath the seat using Harley OEM connectors. It does not produce heat or put a load on the electrical system. Only one unit is needed for either 2 or all 4 turn signals. Can also be used with a combination of LED and incandescent turn signals.  Harley Davidson models that the Eagle Equalizer fit are listed below.

Eagle Equalizer Fitment:

  • ‘96 - ‘10 Softails
  • ‘97 - ‘11 Dynas
  • ‘99 - ‘03 Sportsters
  • ‘06 - ‘09 Street Glide
  • ‘97 - ‘13 Touring Models (Electra Glide, Ultra Classic, Ultra Limited, Road King models)
  • ‘97 - ‘09 Road Glide Models
  • ‘10 - ‘13 Tri-Glide

Bike Not Listed?

If your motorcycle is not listed in the Eagle Equalizer Fitment guide, you will need to use load resistors. Load Resistors are universal and can be used on all models to correct hyper flash.

Shipping

Warranty

Returns

CUSTOMER REVIEWS

Based on 20 reviews Write a review

QUESTIONS & ANSWERS

Ask a Question
  • my bike is a 2011 ultra. do I need the load resister

    Yes, you will need load resistors for your bike.

  • 14 super glide .. I want to remove my center mount stop light will these work?

    They will not be plug and play on that model. You would need to custom wire them into the bike for them to function on your bike.

  • I have a 2019 883 Sportster. Will these work as the running, turn and brake lights? I have no center light. Ty

    Yes these have all three functions. They only work on your bike as long as you do NOT have a rear center brake light on your bike.

  • We can fix this light for royal enfield? And This assembly have brake and indicator together??

    Unfortunately, these will not fit on the Royal Enfield.

  • What do I need for 2014 Sportster 883 super low?

    You will need our 2" 1156 rear turn signals for a 2014 Sportster 883 SuperLow. You can find them here: https://www.eaglelights.com/products/eagle-lights-8748ts-1156-2-led-turn-signals-for-harleys-double-pack . You will not need any additional parts for installation. The turn signals are plug and play.

  • 2012 SG FLHX, plug and play for p/n #8748RTS?

    Yes, they are plug and play ony your Street Glide. You will need a set of load resistors to prevent hyperflashing on your model.

  • 1157 kit for 2018 Street Glide special?

    Yes, you will need our kit with 1157 rear turn signals for a 2018 Street Glide Special. It is plug and play and requires no load resistors.

  • Will these for a 2005 sportster 883 custom

    No, you will need our 1156 rear turn signal kit for your 2005 Sportster 883. You can find it here: https://www.eaglelights.com/products/eagle-lights-8748ts-1156-2-led-turn-signals-for-harleys-double-pack

  • Fit 2018 Street Bob

    Yes, they are plug and play for your 2018 Street Bob.

  • Will this kit require load resistors on a 2013 roadglide custom?If so where are they installed?

    You will need the load resistors for your bike. They are installed under the seat. 

  • I have a 2012 Harley 883 will I need a load resistor on this bike?

    Yes, you will need load resistors for your bike. 

  • I have a '12 Roadglide Custom Which is correct fit please

    Yes, this is the correct kit for your bike. They are plug and play on your bike. 

  • I have a 2013 vrod nightrod special, will these fit my rear tail lights? do I need the load resistors?

    Yes, these will fit your bike. You should not need load resistors on the 2013 model. 

  • Will these fit a 2018 Road King Special?

    Yes, these will fit on your Road King. They are the correct ones for the rear of your Road King.

  • Will they fit a 2018 XL883N which already has the stock LED rear turn signals fitted?

    They will fit your bike. They are plug and play on your motorcycle. 

  • Will they fit flat housings?

    What kind of bike do you have? Normally on the rear, the bulbs are 1156. Let us know and we will recommend the it for you. 

  • I have a 2004 Harley Softail. Where it fit

    Yes, this will fit your bike. 

  • Will they fit a 98 Road King, also would I be able to light them up when I hit the brakes ? Thanks

    Typically the Road King utilizes the 3 1/4" screw in style turn signal, unless you have an aftermarket 2" housing.
    If you do these will fit. They also do light up as the brake lights.

Payment & Security

Amazon American Express Apple Pay Diners Club Discover Google Pay JCB Mastercard PayPal Shopify Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping