Eagle Lights 3 1/4" Horizon Beam LED Turn Signals for Harley Davidson

Save $ 82.01

Fitment : Front Amber (1157 Base)
Load Equalizers for Pre-2014 Motorcycles : None
$ 99.99 $ 182
In stock


Installation Instructions

LED Turn Signal Installation Instructions

Do I need an Eagle Equalizer?

Go Back To Top

The Eagle Equalizer eliminates hyper flash when installing LED turn signals on pre-2014 Harleys by slowing the turn signal flash rate to the normal speed. An Eagle Equalizer is NOT needed on the following models:

  • 2011 and Newer Softail Models
  • 2012 and Newer Dyna Models
  • 2014 and Newer Sportster Models
  • 2014 and Newer Touring Models
  • All of 2014 and newer Harley-Davidson Motorcycles

An Eagle Equalizer is the plug and play solution to correct hyper flash. Hyper flash is when the turn signals will start flashing faster than normal after a few seconds. The Eagle Equalizer plugs directly into the wiring harness underneath the seat using Harley OEM connectors. It does not produce heat or put a load on the electrical system. Only one unit is needed for either 2 or all 4 turn signals. Can also be used with a combination of LED and incandescent turn signals.  Harley Davidson models that the Eagle Equalizer fit are listed below.

Add your year, make and model and we will include the correct Eagle Equalizer for your bike.

Standard Eagle Equalizer Fitment:

  • ‘96 - ‘10 Softails
  • ‘97 - ‘11 Dynas
  • ‘99 - ‘03 Sportsters
  • ‘06 - ‘09 Street Glide
  • ‘97 - ‘13 Touring Models (Electra Glide, Ultra Classic, Ultra Limited, Road King models)
  • ‘97 - ‘09 Road Glide Models
  • ‘10 - ‘13 Tri-Glide

Sportster Eagle Equalizer Fitment:

  • 2004-2013 Sportster XL Models
  • Street Glide / Road Glide Eagle Equalizer Fitment

  • 2010-2013 Street Glide and Road Glide models
  • Do I need an Load Resistor?

    Go Back To Top

    If your motorcycle is not listed in the Eagle Equalizer Fitment guide, you will need to use load resistors. Load Resistors are universal and can be used on all models to correct hyper flash. They are spliced into the wiring harness underneath the seat.


    Lifetime Warranty



    Based on 10 reviews Write a review


    Ask a Question
    • Will these fit a 2017 street glide special?

      You will need the 2" version. You can find them here.

    • Would these still need load resistors?

      Yes, you will wtill need load resistors if your bike like 2013 or older.

    • Will these work on a 2017 Indian Scout?

      Unfortunately, they will not work on the Indian Scout. 

    • I have a 98 Road King Classic, and looking to upgrade the rear yellow turn signal bulbs to LED’s, and possible make them light up when I hit the brakes, and still be plug and play. Is that a possibility? Or will I have to do some rewiring ?

      Unfortunately it will not be possible without requiring the brake light on your bike. They will fit the stock turn signal housings. 

    • Do the front blinkers stay on as lights when not used or do they just come on when the blinker is turned on

      The stay on as amber running lights when the blinker is not being used. The are a brighter amber when the turn signal is active. 

    Payment & Security

    Amazon American Express Apple Pay Diners Club Discover Google Pay JCB Mastercard PayPal Shop Pay Venmo Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Estimate shipping

    You may also like

    Recently viewed