Eagle Lights SUNBURST Rear 2" LED 1156 Turn Signals for Harley Davidson

Save $ 34
5 reviews

Smoked Lenses : No Lenses
Load Equalizers for Pre-2014 Motorcycles : None
Price:
$ 109.99 $ 143.99
Stock:
In stock

Description

Installation Instructions

LED Turn Signal Installation Instructions

Do I need an Eagle Equalizer?

Go Back To Top

The Eagle Equalizer eliminates hyper flash when installing LED turn signals on pre-2014 Harleys by slowing the turn signal flash rate to the normal speed. An Eagle Equalizer is NOT needed on the following models:

  • 2011 and Newer Softail Models
  • 2012 and Newer Dyna Models
  • 2014 and Newer Sportster Models
  • 2014 and Newer Touring Models
  • All of 2014 and newer Harley-Davidson Motorcycles

An Eagle Equalizer is the plug and play solution to correct hyper flash. Hyper flash is when the turn signals will start flashing faster than normal after a few seconds. The Eagle Equalizer plugs directly into the wiring harness underneath the seat using Harley OEM connectors. It does not produce heat or put a load on the electrical system. Only one unit is needed for either 2 or all 4 turn signals. Can also be used with a combination of LED and incandescent turn signals.  Harley Davidson models that the Eagle Equalizer fit are listed below.

Add your year, make and model and we will include the correct Eagle Equalizer for your bike.

Standard Eagle Equalizer Fitment:

  • ‘96 - ‘10 Softails
  • ‘97 - ‘11 Dynas
  • ‘99 - ‘03 Sportsters
  • ‘06 - ‘09 Street Glide
  • ‘97 - ‘13 Touring Models (Electra Glide, Ultra Classic, Ultra Limited, Road King models)
  • ‘97 - ‘09 Road Glide Models
  • ‘10 - ‘13 Tri-Glide

Sportster Eagle Equalizer Fitment:

  • 2004-2013 Sportster XL Models
  • Street Glide / Road Glide Eagle Equalizer Fitment

  • 2010-2013 Street Glide and Road Glide models
  • Do I need an Load Resistor?

    Go Back To Top

    If your motorcycle is not listed in the Eagle Equalizer Fitment guide, you will need to use load resistors. Load Resistors are universal and can be used on all models to correct hyper flash. They are spliced into the wiring harness underneath the seat.

    Shipping

    Lifetime Warranty

    Returns

    Customer Reviews
    4.4 Based on 5 Reviews
    Write a Review

    Thank you for submitting a review!

    Your input is very much appreciated. Share it with your friends so they can enjoy it too!

    Filter Reviews:
    MP
    03/09/2020
    Martin P.
    United States United States

    Awesome

    That’s the best leds

    MP
    01/10/2020
    Mark P.
    United States United States

    Great design but...

    The Sunburst design is exceptional, it is a pure plug n play set up, no wires or led alignment issues to contend with and they are very bright. However, the only draw back it the hyper flash of the turn signal indicator. The turn signals themselves work/flash fine it's just the indicator. They are installed on a 2016 Street Glide and look great. Went through the BCM sync steps a dozen times but the BCM will not recognize them and continues to hyper flash the indicator. Eagle lights support recommended trading them in for the Gen II models at no cost. These have the bayonet socket and wire leading the the led module. Not sure I want to trade the Sunburst for them..Still considering. I will say their customer support is great just wish they had a Sunburst style/model that didn't cause hyper flash. This is the only reason for the 4 star rate.

    Mark Page verified customer review of Eagle Lights SUNBURST Rear 2 LED Turn Signals for Harley DavidsonMark Page verified customer review of Eagle Lights SUNBURST Rear 2 LED Turn Signals for Harley Davidson
    KW
    10/31/2019
    Kelly W.
    United States United States

    Becoming less impressed

    Purchased the Sunburst lights last year. Front and rear for my 2018 Fat Bob. After 3000 miles one of the rear lights failed. Warranty replacement was sent. No problem there. It happens....... Now after 5000 miles the other rear light has failed? The socket sleeve has come loose on both rear light assemblies causing the internal circuit to fail. Not sure how the socket sleeve is bonded to the aluminum body but it is failing. I also noticed one of the pins on the socket sleeve has sheared off? I am hoping the front lights do not follow suit. Warranty is fine but I only get a one time replacement, so two down two to go..... The lights are very bright even with tinted lenses and function well. However once they have all failed I will be trying other brands.

    G
    04/08/2019
    Greg

    Really, really bright

    OK I'm a fan of EL now, first I started with the front turn signal DRL kit smoked lens, installed 10 mins, tested and I couldn't believe the difference from stock bulb so much brighter and sharper, I got the rear ones next and same easy installation, moral of the story just buy the whole set, plug and play for my 2016 HD St Gld Spc.

    R
    06/14/2016
    Rich

    Wow these lights are 10X better than stock.

    Wow these lights are 10X better than stock.

    QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about this.

    Payment & Security

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Payment Methods:

    Amazon American Express Apple Pay Diners Club Discover Elo Google Pay JCB Mastercard PayPal Shop Pay Venmo Visa

    Estimate shipping

    You may also like

    Recently viewed