Eagle Lights SUNBURST Rear 2" LED Turn Signals for Harley Davidson

Save $ 34
Part Number: 8748SB-1157R | Free Shipping | Lifetime Warranty |
Earn 1099 EaglePoints

7 reviews |

Smoked Lenses : No Lenses
Load Equalizers for Pre-2014 Motorcycles : None
$ 109.99 $ 143.99
In stock


Installation Instructions

Do I need an Eagle Equalizer?

Go Back To Top

The Eagle Equalizer eliminates hyper flash when installing LED turn signals on pre-2014 Harleys by slowing the turn signal flash rate to the normal speed. An Eagle Equalizer is NOT needed on the following models:

  • 2011 and Newer Softail Models
  • 2012 and Newer Dyna Models
  • 2014 and Newer Sportster Models
  • 2014 and Newer Touring Models
  • All of 2014 and newer Harley-Davidson Motorcycles

An Eagle Equalizer is the plug and play solution to correct hyper flash. Hyper flash is when the turn signals will start flashing faster than normal after a few seconds. The Eagle Equalizer plugs directly into the wiring harness underneath the seat using Harley OEM connectors. It does not produce heat or put a load on the electrical system. Only one unit is needed for either 2 or all 4 turn signals. Can also be used with a combination of LED and incandescent turn signals.  Harley Davidson models that the Eagle Equalizer fit are listed below.

Add your year, make and model and we will include the correct Eagle Equalizer for your bike.

Standard Eagle Equalizer Fitment:

  • ‘96 - ‘10 Softails
  • ‘97 - ‘11 Dynas
  • ‘99 - ‘03 Sportsters
  • ‘06 - ‘09 Street Glide
  • ‘97 - ‘13 Touring Models (Electra Glide, Ultra Classic, Ultra Limited, Road King models)
  • ‘97 - ‘09 Road Glide Models
  • ‘10 - ‘13 Tri-Glide

Sportster Eagle Equalizer Fitment:

  • 2004-2013 Sportster XL Models
  • Street Glide / Road Glide Eagle Equalizer Fitment

  • 2010-2013 Street Glide and Road Glide models
  • Do I need a Load Resistor?

    Go Back To Top

    If your motorcycle is not listed in the Eagle Equalizer Fitment guide, you will need to use load resistors. Load Resistors are universal and can be used on all models to correct hyper flash. They are spliced into the wiring harness underneath the seat.


    Lifetime Warranty



    Ask a Question
    • Will these cause hyper flash of the TS indicator on a 2016 Street Glide?

      Yes, the turn signal indicator on the Street Glide models will flash a faster than normal rate. Unfortunately, the turn signal indicator will not calibrate with the turn signals with the BCM on the Street Glide. It does not hurt the light or the Street Glide. We also have Generation II turn signals that have the same function as the stock light that will completely sync with the BCM. You can find than here. https://www.eaglelights.com/products/eagle-lights-generation-ii-midnight-edition-led-turn-signals

    • Are these Plug and play for my 2011 wide glide?

      Yes, these lights are a direct replacement for your 2011 Wide Glide. You will need load resistors to ensure proper funcitonality and flash speed of the turn signal.

    • Are the sunburst sold in a set?

      The Suburst turn signals are sold by the pair.

    • Will these work on a 2018 Street Glide Special?

      Yes, they are a plug and play replacement for a 2018 Street Glide Special.

    • Does these light work with custom dynamics magic strobe brake light and turn signal flasher

      Yes, they will function perfectly with them.

    • Will they fit a 2006 night train hd

      Yes they are plug and play on your bike. 

    • Will this fit a 2012 Sportster iron 883

      Yes, they are plug and play on your bike. 

    Payment & Security

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Payment Methods:

    Amazon American Express Apple Pay Diners Club Discover Elo Google Pay JCB Mastercard PayPal Shop Pay Venmo Visa

    Estimate shipping

    You may also like

    Recently viewed