Eagle Lights 3 1/4" Flat Style LED Front (2 x 1157) and Rear Amber (2 x 1156) Turn Signals For Harleys

Save $ 73
filler

Smoked Lenses : No Smoked Lenses
Load Equalizers for Pre-2014 Motorcycles : None
Price:
$ 179.99 $ 252.99
Stock:
In stock


Description

Installation Instructions

LED Turn Signal Installation Instructions PDF

Do I need an Eagle Equalizer?

Go Back To Top

The Eagle Equalizer eliminates hyper flash when installing LED turn signals on pre-2014 Harleys by slowing the turn signal flash rate to the normal speed. An Eagle Equalizer is NOT needed on the following models:

  • 2011 and Newer Softail Models
  • 2012 and Newer Dyna Models
  • 2014 and Newer Sportster Models
  • 2014 and Newer Touring Models
  • All of 2014 and newer Harley-Davidson Motorcycles

An Eagle Equalizer is the plug and play solution to correct hyper flash. Hyper flash is when the turn signals will start flashing faster than normal after a few seconds. The Eagle Equalizer plugs directly into the wiring harness underneath the seat using Harley OEM connectors. It does not produce heat or put a load on the electrical system. Only one unit is needed for either 2 or all 4 turn signals. Can also be used with a combination of LED and incandescent turn signals.  Harley Davidson models that the Eagle Equalizer fit are listed below.

Add your year, make and model and we will include the correct Eagle Equalizer for your bike.

Standard Eagle Equalizer Fitment:

  • ‘96 - ‘10 Softails
  • ‘97 - ‘11 Dynas
  • ‘99 - ‘03 Sportsters
  • ‘06 - ‘09 Street Glide
  • ‘97 - ‘13 Touring Models (Electra Glide, Ultra Classic, Ultra Limited, Road King models)
  • ‘97 - ‘09 Road Glide Models
  • ‘10 - ‘13 Tri-Glide

Sportster Eagle Equalizer Fitment:

  • 2004-2013 Sportster XL Models
  • Street Glide / Road Glide Eagle Equalizer Fitment

  • 2010-2013 Street Glide and Road Glide models
  • Do I need an Load Resistor?

    Go Back To Top

    If your motorcycle is not listed in the Eagle Equalizer Fitment guide, you will need to use load resistors. Load Resistors are universal and can be used on all models to correct hyper flash. They are spliced into the wiring harness underneath the seat.

    Shipping

    Lifetime Warranty

    Returns

    CUSTOMER REVIEWS

    Based on 2 reviews Write a review
    -->

    QUESTIONS & ANSWERS

    Ask a Question
    • Will these fit a 2008 Harley Heritage Softail with rear tail light?

      The fronts are the correct version, but the rears are not. If you have a rear tail light, you will need the 1156 version. 

    • What's the difference between these and the gen 2 lights? Will both fit my 09 road king?

      The Generation II turn signals are brighter and have a full running light. The Generation I have LED halo rings.

    • I have a 2009 hd road king. Will these fit?

      Yes, they are the correct turn signals for your Road King.

    • How do you protect the LED's from being damaged without a lens cover in the Gen ll for a 2004 road king. If there isn't a cover how much of a hassle will it be to clean bugs out of the lights?

      Yes, you will need to use either the factory lens covers or a new set of lens covers.  You will need the covers with any of our LED turn signals.  They both protect the turn signals and are used to hold the turn signals in place.

    • Will this setup fit my 2013 Heritage Softail Classic.

      Yes, this is the correct kit for your bike. 

    Payment & Security

    Amazon American Express Apple Pay Diners Club Discover Google Pay JCB Mastercard PayPal Shop Pay Venmo Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Estimate shipping

    You may also like

    Recently viewed