Eagle Lights LED Turn Signal Upgrade for your Harley Davidson! Made for models with center rear tail light. The LED turn signals have an 1156 single contact base. The 48 LEDs produce a vibrant amber light.Comes with two LED turn signal modules.

WHICH LED TURN SIGNAL KIT DO I NEED? Harley Davidson motorcycles come with one of two styles of rear LED turn signals, 1156 Single Contact and 1157 Double Contact. If you have a center rear tail light, you will need this kit. It has 1156 rears that function solely as turn signals. If you do NOT have a rear center tail light, you will need our 1157 turn signal kit. (Part number 8748RTS)
REAR LED TURN SIGNALS: This kit includes 1156 Rear LED Turn Signals. You will need the 1156 Rear Turn signals if you have a rear center brake light. They feature 48 amber LEDs that illuminate for a highly visible turn signal that is over 3X brighter than stock. They are a great looking safety upgrade.
EASY INSTALLATION: With the Eagle Lights LED Turn Signals, upgrading couldn’t be easier. Our LED Turn Signals are plug and play on most Harley Davidson models. Installation typically takes about 5 minutes. Pop off the lens, replace the old bulbs with your new LED turn signal, put the lens back on and go for a ride. Ride safer, look better, and ride longer with the Eagle Lights LED Turn Signals.
EAGLE LIGHTS LIFETIME WARRANTY - Our Turn signals are designed to outlast your bike! But should something go wrong, you are covered by a lifetime manufacturer's warranty. The best warranty in the business! No hassle returns and no hassle warranty replacement.
FITMENT: Fits Harley Softails, Road Glides, Dynas, Road Kings and Sportsters as well as all other models with single contact 1156 rear turn signals. The 1156 base allows them to replace any 1156 bulb with LED.

PRODUCT NOTES:
Hyper flashing is when turn signals flash faster than normal. If your bike is a pre-2014, it may need load resistors to prevent hyper flashing. You can select them from the drop down menu when ordering. Add our smoked lenses for a great new look.

Installation Instructions

LED Turn Signal Installation Instructions

Do I need an Eagle Equalizer?

Go Back To Top

The Eagle Equalizer eliminates hyper flash when installing LED turn signals on pre-2014 Harleys by slowing the turn signal flash rate to the normal speed. An Eagle Equalizer is NOT needed on the following models:

2011 and Newer Softail Models
2012 and Newer Dyna Models
2014 and Newer Sportster Models
2014 and Newer Touring Models

An Eagle Equalizer is the plug and play solution to correct hyper flash. Hyper flash is when the turn signals will start flashing faster than normal after a few seconds. The Eagle Equalizer plugs directly into the wiring harness underneath the seat using Harley OEM connectors. It does not produce heat or put a load on the electrical system. Only one unit is needed for either 2 or all 4 turn signals. Can also be used with a combination of LED and incandescent turn signals. Harley Davidson models that the Eagle Equalizer fit are listed below.

Eagle Equalizer Fitment:

‘96 - ‘10 Softails
‘97 - ‘11 Dynas
‘99 - ‘03 Sportsters
‘06 - ‘09 Street Glide
‘97 - ‘13 Touring Models (Electra Glide, Ultra Classic, Ultra Limited, Road King models)
‘97 - ‘09 Road Glide Models
‘10 - ‘13 Tri-Glide

Bike Not Listed?

If your motorcycle is not listed in the Eagle Equalizer Fitment guide, you will need to use load resistors. Load Resistors are universal and can be used on all models to correct hyper flash.